Strain Gage Transducers Instruments Special Instruments Strain gage

 



 

Metal-backing Gage

This gage is designed for successful strain measurement on the concrete surface. It has a thin stainless-steel backing which prevents the penetration of moisture from the reverse side. It provides good electrical insulation to the concrete surface. The WFLM gage has a moistureproof overcoating and integral lead in addition to stainless-steel backing. Stable measurement can be achieved by bonding the gage with PS adhesive.

Main Test Materials Concrete
Mortar
Materials Backing Stainless steel
Operating Temperature -20 to +80°C Materials Element Ni-Cr alloy foil
Compensation range +10 to +80°C Strain limit 0.5%
(5000×10-6)
Bonding adhesive PS Fatigue life at room temp. 1×105
(±1000×10-6)

  • Single element(G.F. 2.0 approx.)
  • Type Gage
    length
    (mm)
    Gage
    width
    (mm)
    Backing
    length
    (mm)
    Backing
    width
    (mm)
    Backing
    thickness
    (mm)
    Resistance
    (Ω)
    FLM-30-11 30 0.5 60 18 0.12 120
    FLM-60-11 60 0.7 90 18 0.12 120

    [ Waterproof Type ]

  • Single element(G.F. 2.0 approx.)
  • 0.09mm23-wire paralleled Polythylene leadwire pre-attached
    Total resistance per meter : 0.4(Ω)
    Lead wire length : 3-wire paralleled Polyethylene lead wire of 2m long

    Type Gage
    length
    (mm)
    Gage
    width
    (mm)
    Backing
    length
    (mm)
    Backing
    width
    (mm)
    Backing
    thickness
    (mm)
    Resistance
    (Ω)
    WFLM-30-11-2LT 30 0.5 60 18 4 120
    WFLM-60-11-2LT 60 0.7 90 18 4 120

    Site Map: Strain Gages, Strain Gage Series List, Integral Lead Wire Option, Strain Gage Adhesives, Coating Materials, Connection Terminals, Strain Gage Coding System, Theory of Strain Gages, Strain Gage Connections and Bridge Circuits, Load Cells, Displacement Tranducers, Pressure Transducers, Acceleration Transducers, Data Loggers/Static Strain meters, Dynamic Strainmeters, Histrogram Recorder, Indicators, Special Instrumentation, Related Instrumentation